Epson SC-B6000 User Manual Download Page 58

Page: 58 / 89

Fill the ink tank with the ink from the ink pack.

Insert the spout of the ink pack into the ink tank
ink inlet groove and slowly tilt to pour out the
ink.

Important:

Get all the ink out of the ink pack so that there
is none remaining.

Do not use the ink in an ink pack to refill
multiple different ink tanks.

This can cause messages from the remaining
ink warning system to not be displayed
properly.

Put the ink inlet cap back on the ink tank.

Close the slider ink inlet cover.

Replacing Maintenance Boxes

If the message

No Enough Space

is displayed, replace

the specified Maintenance Box.

Supported Maintenance Boxes

“Options and Consumable Products” on

page 71

Important:

Do not reuse maintenance boxes that have been
removed and left out in the open for a long period of
time. The ink on the inside will be dry and hard and
will be unable to absorb enough ink.

SC-B6000 Series User’s Guide

Maintenance

Summary of Contents for SC-B6000


























































































Search results

Summary of Contents for SC-B6000

Reviews:

Related manuals for SC-B6000

Brands by name

Popular brands

Epson SC-B6000, User Manual

Search results

Summary of Contents for SC-B6000

Reviews:

Related manuals for SC-B6000

Brands by name

Popular brands