Epson S5U1C17001C, Manual

Page: 557 / 742

S5U1C17001C ManUal
EPSOn
10-107
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
10
Debugger
info breakpoints
(display breakpoint list) [ICD Mini / SIM]
Operation
Displays a list of breakpoints currently set.
Format
info breakpoints
Display
The breakpoint list is displayed as shown below.
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y 0x00c00026 in main at main.c:11
breakpoint already hit 1 time
ignore next 10 hits
2 hw breakpoint del n 0x00c00038 in sub at main.c:20
Num: Indicates a break number.
Type: Indicates the type of breakpoint.
breakpoint
Software PC breakpoint
hw breakpoint
Hardware PC breakpoint
Disp: Indicates breakpoint status after a break hit.
keep
The breakpoint will not be deleted.
del
The breakpoint will be deleted. This means that the breakpoint is a temporary break.
Enb: Indicates whether the breakpoint is effective or ineffective.
y
Effective
n
Ineffective
Address: Indicates the address at which a breakpoint is set (in hexadecimal).
What: Indicates the location where a breakpoint is set. This information is displayed in "
in
function name
at
source file name : line number " format.
Moreover, the number of times a breakpoint has thus been hit is displayed in "breakpoint already hit N times"
format; the set content of the
ignore
command is displayed in "ignore next N hits" format.
When breakpoints are not set at any location, the list is displayed as shown below.
(gdb) info breakpoints
No breakpoints or watchpoints.
GUI
A list of software PC breakpoints (including temporary breaks) is displayed in the [Breakpoints] window. For
details, see Section 10.4.6, "[Breakpoints] Window".