Epson S5U1C17001C, Manual

Page: 456 / 742

10-6
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
10.3.3 Quitting the Debugger
To quit the debugger, select [Exit] from the [File] menu in the [Source] window.
[File] menu
Alternatively, you can click the Close [
×
] button of the Source Window or enter the quit (q) command in the [Console]
window to close the debugger.
(gdb)
q
When you quit the gdb debugger, a message box appears to prompt you to select whether to store the gdb debugger
settings.
The gdb debugger settings are the content recorded in gdbtk.ini (including window positions and colors), settings
for break points, and the list of symbols registered in the Watch Window.
Select [Yes (Y)] to store the gdb debugger settings. When you restart the gdb debugger, you can restore the previous
status.
Select [No (N)] to choose not to store the gdb debugger settings.
If you try to quit the gdb debugger without executing the Detach command, the following dialog appears.
Select [Yes (Y)] to quit the gdb debugger.
Select [No (N)] to choose not to quit the gdb debugger.
note : When using an ICD to debug a program (in ICD Mini mode), always be sure to close the
debugger before turning off power to the ICD. Should you turn off power to the ICD while running
the debugger, you will be unable to reconnect it. In such case, you need to restart your computer.