Epson S1D16000 Series, Technical Manual

Page: 77 / 86

S1D16702 Series
5–8
EPSON
Rev.1.0
V
DD
=0V
Parameter Symbol Rating Unit
Supply voltage (1) V
SS
–7.0 to +0.3 V
Supply voltage (2) V
5
–30.0 to +0.3 V
Supply voltage (3) V
0
, V
1
, V
4
V
5
–0.3 to +0.3 V
Input voltage V
I
V
SS
–0.3 to +0.3 V
Output voltage V
O
V
SS
–0.3 to +0.3 V
Output current (1) I
O
20 mA
Output current (2) I
OCOM
20 mA
Operating temperature Topr –40 to + 85
°
C
Storing temperature Tstg –65 to +150
°
C
Soldering temperature and time Tsol 260
°
C · 10sec –
9. ABSOLUTE MAXIMUM RATINGS
Notes:
1. The voltage of V
0
, V1 and V
4
must always satisfy the condition of V
DD
≥
V
0
≥
V
1
≥
V
4
≥
V
5
.
2. Floating of the logic system power during while the LCD drive system power is applied, or exceeding V
SS
= –2.6 V or more can cause permanent damage to the LSI. Functional operation under these conditions
is not implied.
Care should be taken to the power supply sequence especially in the system power ON or OFF.
3. All the above voltage is based on V
DD
= 0 V.
www.DataSheet4U.com