Printing From a Digital Camera
23
Printing From a Digital Camera
You can connect a digital camera to the RX680 Series and print your photos
directly from the camera.
Check your camera manual to see if it supports PictBridge
™
or USB DIRECT-
™
printing. Also make sure your photos are in JPEG format and sized from
80 × 80 to 9200 × 9200 pixels.
Note:
Epson cannot guarantee the compatibility of any cameras. Some combinations of paper
type, size, and layout may not be supported, depending on your camera and the Epson
Stylus Photo RX680 Series settings.
1. Make sure the RX680 Series is turned on and there are no memory cards
inserted in its memory card slots.
2. Connect the USB cable that came with your camera to the
EXT. I/F
port on
the front of your RX680 Series.
3. Turn on your camera. You see a message on the display screen.
4. Load Epson photo paper. See page 6 for instruction.
5. Press the
Setup
button.
6. Press
l
or
r
to select
PictBridge Setup
, then
press
OK
.
7. Select your settings and press
OK
. (See the on-screen
User’s Guide
for detailed instructions.)
8. Follow the instructions that came with your camera
to select your photos and print them.
sprx680_qg.book Page 23 Wednesday, June 6, 2007 8:40 AM
