Epson RX595 - Stylus Photo Color Inkjet, Service Manual, Page: 61 / 131

EPSON Stylus Photo RX585/RX595/RX610 Revision B
Disassembly and Assembly Overview 61
4.1.4 Making a Special Tool for CSIC Board
The CSIC board (refer to p.73 ) can be easily removed by using a special tool. The
method for making the tool is described below.
1. Prepare a handle part of a clip, or a similar metal wire piece.
Figure 4-1. Making Special Tool for CSIC Board (1)
2. Bend the metal wire as shown below.
Figure 4-2. Making Special Tool for CSIC Board (2)
4.1.5 How to Unlock the Carriage
† Some of the disassembling operations require unlocking the carriage. In those
cases, carry out any of the following operations to unlock the carriage and move
the carriage to other than its home position.
„
Turn the power off forcibly by disconnecting the power cable when the CR
Unit becomes unlocked and moves away from the home position.
„
Until the carriage is unlocked, turn the EJ Roller gear on the left side of the
printer in the direction of the arrow as shown in Figure 4-9.
Figure 4-3. How to Unlock the Carriage
Handle part
Clip
7mm
25mm
50mm
Special Tool
C A U T I O N
Be extremely careful not to damage the EJ Roller gear. Extra care
must be taken to avoid injury from sharp metal edges.
Carriage Lock Lever
EJ Roller Gear