Epson RX595 - Stylus Photo Color Inkjet, Service Manual, Page: 119 / 131

EPSON Stylus Photo RX585/RX595/RX610 Revision B
Maintenance
Overview 119
LUBRICATION OF CARRIAGE ASSY AND CR GUIDE SHAFT
LUBRICATION AT INSTALLATION OF CARRIAGE ASSY
LUBRICATION OF APG UNIT
Lubrication
Points CR Guide Shaft and
Carriage Assy
Type G-71
Amount of
Application
Area A:
210±20 mg (x2)
Area B:
210±20 mg (x2)
Applying
Tool
Injector
Precautions
Make sure that the belt
and any parts other than
those specified are free
from grease.
Lubrication
Points Right and Left PG
Cams (Cam Contour)
Type G-71
Amount of
Application
ø 1x One round
Applying
Tool
Injector
Precautions
Area A Area A
Area A: Inject 210 ± 20 mg of G-71
into the hole
Area B: Apply 210 ± 20 mg of G-21
to the CR Guide Shaft in its
middle area.
G-71
Left side of
printer frame
Right side of
printer frame
G-71
Lubrication
Points
CR Guide Shaft
(Grooves for pressure
springs)
Type G-71
Amount of
Application
(1) ø 1x 5 mm (x2)
(2) ø 1x 10 mm (x1)
(3) ø 1x 15 mm (x1)
Applying
Tool
Injector
Precautions
Lubrication
Points Upper part of the shaft
holders (5 points)
Type G-71
Amount of
Application
ø 3x One round (x5)
Applying
Tool
Injector
Precautions
Disassemble the APG
Unit and apply grease
before installing the
APG Unit.
Lubrication
Points Around the Spur gear
28.8
Type G-71
Amount of
Application
ø 3x One round
Applying
Tool
Injector
Precautions
Apply grease before
installing the APG
Unit.
G-71
Left side of
printer frame
Right side of
printer frame
G-71
Shaft holder
Lubrication point
G-71
2mm
G-71