Epson RX595 - Stylus Photo Color Inkjet, Service Manual, Page: 117 / 131

EPSON Stylus Photo RX585/RX595/RX610 Revision B
Maintenance
Overview 117
6.1.3 Lubrication
The types and amount of grease to be applied have been determined based on the
evaluation at factory. Accordingly, definitely use a suitable volume of designated
grease to the designated points for repair and maintenance of the product. Designated
types of grease and application points are as shown below.
† Specified lubricant, etc.
LUBRICATION OF FRONT FRAME
LUBRICATION OF PAPER GUIDE FRONT ASSY
C A U T I O N
„
Never use any grease other than those specified, since such
grease can affect adversely the mechanical life and functions of
this product or result in damage to this equipment.
„ As the suitable volume is also designated based on evaluation
result, avoid applying any undesignated volume.
„
Do not lubricate any part other than those specified. Take care
that no grease adheres to any paper transport parts, such as
rollers, or the Printhead; otherwise, the print quality may drop.
Table 6-3. Specified Lubricant, etc.
Type Name Parts Code Available
Grease
G-71 1304682
EPSON
G-74 1409257
G-77 1455324
G-45 1033657
Lubrication
Points
Sliding surface and
spring catch area on the
front frame (2 points
each: right and left)
Type G-71
Amount of
Application
ø 1x3 mm x2
ø 1x7 mm x2
Applying
Tool
Injector
Precautions
Make sure that the
Eject Frame Assy
moves up and down
smoothly.
Lubrication
Points
PF Roller Shaft and the
shaft holders (2 points:
right and left)
Type G-71
Amount of
Application ø 1x3 mm
Applying
Tool
Injector
Precautions
Make sure that the
coated surface of the PF
Roller Shaft is free
from grease.
Left side of
front frame
Right side of
front frame
ø1x7
ø1x7
ø1x3
ø1x3
G-71
Left side of PF
Roller Shaft
Right side of PF
Roller Shaft
G-71
Coated surface must
be free from grease