Epson RIP Station 5100, Administrator'S Manual, Page: 93 / 140

4
4-15 Network Setup
PServer Setup (NDS Configuration
)
In initial setup, the RIP Station was connected to the network and an NDS directory
tree, with a Printer, a Print Server, and one or more Print Queue objects for
RIP Station jobs (see page 5-4), was configured. You can make any changes to that
setup through Fiery WebSetup. To modify NDS Setup you may need permission to
browse the NDS tree. If access to the Print Server is restricted, you’ll need a login
password.
Enable NDS Check this box if NDS has already been enabled on the network.
Change Trees... Click to open the NDS Configuration window. This option is available only when
Enable NDS is selected.
Add NDS Tree You can have only one NDS tree, so the following process is required to change
trees:
1. Select the current NDS tree and click Remove.
2. Select the new NDS tree and click Add.
Your new NDS tree selection automatically overwrites any previous tree
selection. If you change the NDS tree selection and there are also current
Bindery settings, you are alerted that they will be deleted. If you
continue with NDS Setup, you can replace Bindery settings afterwards.
To exit NDS Setup, choose
Cancel .
3. Click OK.
The Select login user window appears.
Select User Login 1. Select the User Login object from the display in the Select User Login
window.
2. Enter a password if necessary.
3. Click Next.
The Select print server window appears.
Select Print Server 1. Select the print server from the display in the Select Print Server window.
2. Enter a password if necessary.
3. Click OK.
The Select print queue root window appears.