Epson RIP Station 5100, Administrator'S Manual, Page: 86 / 140

4
4-8 Using Fiery WebSetup
Network Setup
You can modify most of the Network Setup options from Fiery WebSetup.
T
O CONFIGURE NETWORK PORTS
:
• Click the Port tab in the Network Setup dialog box.
You can then adjust settings as detailed in the following sections.
Ethernet (Port Setup)
Enable Ethernet
—Select if the RIP Station is to be connected to an Ethernet network.
Transmission Speed
—Select
Auto Detect
if your network environment is mixed, or
select the speed (10 Mbps or 100 Mbps) of the network to which the RIP Station is
attached.
The options
10 Mbps TP
and
10 Mbps AUI
refer to how Ethernet is cabled, either
through twisted pair cable or the AUI.