manualshive.com logo in svg

Epson RIP Station 5100, Administrator'S Manual, Page: 48 / 140

Share
Download
Epson RIP Station 5100 Administrator'S Manual Download Page 48

3

3-14

Performing Setup from the Control Panel

Protocol Setup options

AppleTalk Zone
List of zones

The RIP Station searches the network for AppleTalk zones in your network segment. 
Scroll through the list to select the AppleTalk zone in which you want the RIP Station 
to appear. If your segment has only one zone, the RIP Station is assigned to that zone 
automatically.

The message “No AppleTalk zones found” may mean your network has no zones, or 
the network cable is not connected (see page 6-4). Choose OK. 

To configure the RIP Station, choose each protocol and enter the settings for that 
protocol. You can enable AppleTalk, TCP/IP, and IPX/SPX communication 
simultaneously.

Network Setup

Protocol Setup

AppleTalk Setup

Enable AppleTalk
Yes/No [Yes]

Select Yes if you have an AppleTalk network connected to the RIP Station. This setting 
enables the RIP Station to communicate over AppleTalk networks.

Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup

Protocol Setup

 

Summary of Contents for RIP Station 5100













































































































































Reviews:

No comments