manualshive.com logo in svg

Epson RIP Station 5100, Administrator'S Manual, Page: 17 / 140

Share
Download
Epson RIP Station 5100 Administrator'S Manual Download Page 17

 

1

1-3

Stages of installation on the network

Summary of RIP Station network installation

At each workstation that will print to the 
RIP Station:

• Install the appropriate printer drivers and 

printer description files and connect to one or 
more queues.

• For computers that will use them, install Fiery 

utilities and an Internet browser.

• Verify the RIP Station in the list of printers and 

run a test print.

RIP Station available on the network

Network server

UNIX

Mac OS

Windows

RIP Station

RIP Station

Prepare a network node. Connect the RIP Station 
to the printer and to the network.

Configure UNIX, Windows NT 4.0 and IPX (Novell) 
servers to specify RIP Station print queues and 
RIP Station users.

Install PostScript printer files on the server.

No special configuration of AppleShare servers is 
required.

On the RIP Station Control Panel, configure at least 
the Server Setup, Network Setup, and Printer 
Setup.

C

ONNECTION

S

ERVER

 

CONFIGURATION

RIP S

TATION

 S

ETUP

C

LIENT

 S

ETUP

Summary of Contents for RIP Station 5100













































































































































Reviews:

No comments