Epson R1800 - Stylus Photo Color Inkjet Printer, Service Manual

Page: 46 / 234

EPSON Stylus Photo R1800/R2400 Revision B
Troubleshooting Overview 46
Table 3-7. Troubleshooting of Paper Mismatch Error
Occurrence
Timing
Phenomenon Detail
Faulty Part/Part
Name
Check Point Remedy
At operation When feeding a CD-R (Board
Paper), an error is displayed
on the LED and EPW3. Paper EJ Frame
Assy
(CD-R Tray Base) 1. Check if the CD-R Tray Base is closed or not. 1. Open the CD-R Tray Base.
CD-R Sensor 1. Check that the Connector cable of the CD-R Sensor is
securely connected to the connectors of the CD-R Sensor
and Panel Board.
1. Connect the Connector cable of the CD-R
Sensor to the CD-R Sensor and Panel
Board Connectors.
2. Check the CD-R Sensor or Connector cable for damages. 2. Replace the CD-R Sensor with a new one.
Panel Board connector
Connector cable of
the CD-R Sensor
CD-R Sensor
Table 3-8. Troubleshooting of Ink Low
Occurrence
Timing
Phenomenon Detail
Faulty Part/Part
Name
Check Point Remedy
At operation or
during printing A message is displayed on
the LED and EPW3 during
printing. Ink Cartridge 1. Look at the remaining ink indication of the EPW3 to check
the amount of the ink remaining in the Ink Cartridge.
1. Prepare a new Ink Cartridge.
Table 3-9. Troubleshooting of Ink Out Error
Occurrence
Timing
Phenomenon Detail
Faulty Part/Part
Name
Check Point Remedy
During printing After the Carriage has
detected the HP, an error is
displayed on the LED and
EPW3. Ink Cartridge 1. Look at the remaining ink indication of the EPW3 to check
whether the ink remains in the Ink Cartridge.
1. Replace the Ink Cartridge with a new one.