Epson Pro L1500UH User Manual Download

Page: 263 / 296

263

• Clean the projector lens.

Note:

To avoid condensation on the lens after bringing the projector in from a cold environment, let the

projector warm up to room temperature before using it.

• Try connecting the projector to the highest quality connection available on your input source. For

example, connect to an HMDI port or component video ports for a better quality input signal.

• Position the projector close enough to the screen.

• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.

• Adjust the

Sharpness

setting to improve image quality.

• If you are projecting from a computer, press the

Auto

button on the remote control to automatically

adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned
image on the screen and manually adjust the

Tracking

and

Sync

settings.

• If you are projecting from a computer, try using a lower resolution or try to match the projector's native

resolution.

Parent topic:

Solving Image or Sound Problems

Related concepts

Projector Connections

Related references

Projector Setup and Installation Options
Image Quality Settings - Image Menu
General Projector Specifications
Supported Video Display Formats

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:

• Press the

Color Mode

button on the remote control to try different color modes for the image and

environment.

• Check your video source settings.

Summary of Contents for Pro L1500UH









































































































































































































































































































Search results

Summary of Contents for Pro L1500UH

Reviews:

Related manuals for Pro L1500UH

Brands by name

Popular brands

Epson Pro L1500UH, User Manual

Search results

Summary of Contents for Pro L1500UH

Reviews:

Related manuals for Pro L1500UH

Brands by name

Popular brands