Epson Pro L1500UH User Manual Download

Page: 244 / 296

244

Replacing the Remote Control Batteries

The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.

Caution:

Use only the type of batteries specified in this manual. Do not install batteries of different types,

or mix new and old batteries.

Remove the battery cover as shown.

Remove the old batteries.

Warning:

If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on

your hands. If it gets on your hands, wash them immediately to avoid injury.

Summary of Contents for Pro L1500UH









































































































































































































































































































Search results

Summary of Contents for Pro L1500UH

Reviews:

Related manuals for Pro L1500UH

Brands by name

Popular brands

Epson Pro L1500UH, User Manual

Search results

Summary of Contents for Pro L1500UH

Reviews:

Related manuals for Pro L1500UH

Brands by name

Popular brands