174
Parent topic:
Multiple Projector Adjustment Overview
If you are combining images from multiple projectors on a network, you can assign one projector as the
"master" and automatically adjust all the images to match the "master" image. If the projectors are not
connected to a network, you can match each projector's images manually.
Note:
Make sure all networked projectors are connected using LAN cables and have been assigned an
IP address. Also disable the
4K Enhancement
and
Sleep Mode
settings on each projector so they do
not turn off during adjustment.
1.
Turn on all the projectors.
2.
To select a master projector for automatic adjustment, select
Custom
for the
Light Source Mode
setting and set the
Brightness Level
setting to the maximum value for all projectors. The projector
with the darkest projected image is the master projector.
3.
Do one of the following:
• For automatic adjustment, set an ID for the master projector and the remote control.
• For manual adjustment, set an ID for each projector and the remote control.
4.
Adjust each projector's physical position and angle to the screen.
5.
Do one of the following:
• For automatic adjustment, configure tiling automatically.
• For manual adjustment, configure tiling manually.
6.
Adjust the image aspect ratio for each projector.
7.
Adjust the position of the image for each projector using lens shift.
8.
Adjust the zoom and focus for each projector.
9.
Adjust small differences in the images using the
Point Correction
setting.
10. Adjust the edges of the images using the
Edge Blending
and
Black Level
settings.
11. Adjust the brightness and tint of the images using the
Screen Matching
setting.
12. Select sections of the images using the
Scale
setting.
Parent topic:
Summary of Contents for Pro L1500UH
