Epson Pro L12000QNL User Manual Download | Manualshive

Page: 298 / 299

background image

298

1.9

Severability

. If any provision in this Section 1 is found to be unenforceable, that provision shall be

severed with the remainder of this Agreement remaining in full force and effect.

The foregoing shall not

apply to the prohibition against class or representative actions as provided in Section 1.5. This
means that if Section 1.5 is found to be unenforceable, the entire Section 1 (but only Section 1)
shall be null and void.

Parent topic:

Trademarks

EPSON

®

, Instant Off

®

, and Quick Corner

®

are registered trademarks, Epson iProjection is a trademark,

and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

PrivateLine

®

is a registered trademark; SizeWise

TM

is a trademark; and Extra Care

SM

is a service mark of

Epson America, Inc.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Mac, macOS, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.

Google

®

is a registered trademark and Android

TM

and Google Chrome

TM

are trademarks of Google LLC.

HDBaseT

TM

and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.

Parent topic:

Copyright Notice

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Seiko Epson Corporation. The information contained herein is
designed only for use with this Epson product. Epson is not responsible for any use of this information as
applied to other products.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of:
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this

«
...
296
297
298
299
»

Summary of Contents for Pro L12000QNL












































































































































































































































































































Reviews:

No comments

Related manuals for Pro L12000QNL

Brand: OS Pages: 11

IntelliClass IC-300-CSP-P

Brand: Crestron Pages: 2

Brand: CYP Pages: 24

Brand: Barco Pages: 9

Brand: Samsung Pages: 15

Brand: Samsung Pages: 38

Brand: Samsung Pages: 42

Brand: Samsung Pages: 10

Brand: Samsung Pages: 37

D300 - XGA DLP Business Projector

Brand: Samsung Pages: 39

L300 - LCD Projector 3000 Lumen

Brand: Samsung Pages: 39

Brand: Samsung Pages: 45

Brand: Samsung Pages: 42

P410M - LED-based DLP Pocket Projector

Brand: Samsung Pages: 51

Brand: Samsung Pages: 43

2.0071106142725e16

Brand: Samsung Pages: 43

Brand: Samsung Pages: 56

Brand: Samsung Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands