Epson Pro L12000QNL User Manual Download

Page: 264 / 299

264

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:

• Adjust the image focus.

• Clean the projector lens.

Note:

To avoid condensation on the lens after bringing the projector in from a cold environment, let the

projector warm up to room temperature before using it.

• Position the projector close enough to the screen.

• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.

• Adjust the

Sharpness

setting to improve image quality.

• If you are projecting from a computer, press the

Auto

button on the remote control to automatically

adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned
image on the screen and manually adjust the

Tracking

and

Sync

settings.

• If you are projecting from a computer, try using a lower resolution or try to match the projector's native

resolution.

Parent topic:

Solving Image Problems

Related references

Image Quality Settings - Image Menu
General Projector Specifications
Supported Video Display Formats

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:

• Press the

Color Mode

button on the remote control to try different color modes for the image and

environment.

• Check your video source settings.

• Adjust the available settings on the Image menu for the current input source, such as

Brightness

Contrast

Tint

Advanced

, and

Color Saturation

Summary of Contents for Pro L12000QNL












































































































































































































































































































Search results

Summary of Contents for Pro L12000QNL

Reviews:

Related manuals for Pro L12000QNL

Brands by name

Popular brands

Epson Pro L12000QNL, User Manual

Search results

Summary of Contents for Pro L12000QNL

Reviews:

Related manuals for Pro L12000QNL

Brands by name

Popular brands