188
Note:
To reset all saved memories of all types, select
Reset All Memories
in the Reset menu.
7.
Press
Menu
or
Esc
to exit.
Parent topic:
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
You cannot schedule an event to occur at the following times:
• Five minutes before or after a Color Calibration event
• Five minutes before or 30 minutes after a Screen Matching event
Note:
Light Source Calibration events do not start if the projector is used continuously for more than 24
hours, or regularly turned off by shutting off the power outlet. Set
Light Source Calibration
events to
occur only after 100 hours of projector usage.
1.
Press the
Menu
button.
2.
Select the
Extended
menu and press
Enter
.
3.
Select the
Schedule Settings
setting and press
Enter
.
You see a screen like this:
4.
Select the
Schedule
or
Extended Schedule
menu and press
Enter
.
5.
Select
Add New
and press
Enter
.
Summary of Contents for Pro L12000QNL
Page 1: ...Pro L12000QNL L12002QNL User s Guide ...
Page 2: ......
Page 10: ......
Page 288: ...288 Laser warning labels are attached to the projector Inside ...
