109
1
Center of lens
2
Projected image when lens shift is set to the home position
3
Maximum motion range: Up V × 18%, Down V × 5%
Note:
You cannot move the image vertically when the lens is shifted horizontally all the way.
4.
When you are finished, press the
Esc
button on the control panel or remote control.
Note:
The image is clearest when the lens is at the home position. To move the lens to the home
position, press and hold the
Lens Shift
button on the remote control or control panel for at least three
seconds. Set the
A/V Output
setting in the Extended menu to
Always On
so you can move the lens to
the home position even when the projector is in standby mode.
Parent topic:
Using Basic Projector Features
Related references
Projector Setup Settings - Extended Menu
Adjusting the Image Position Using Screen Position
You can adjust the image position if there are margins between the edge of the image and the projected
screen frame.
Note:
You cannot adjust the screen position if the
Screen Type
setting is set to
16:9
.
1.
Turn on the projector and display an image.
2.
Press the
Menu
button.
3.
Select the
Extended
menu and press
Enter
.
4.
Select
Display
>
Screen
>
Screen Position
.
Summary of Contents for Pro L12000QNL
Page 1: ...Pro L12000QNL L12002QNL User s Guide ...
Page 2: ......
Page 10: ......
Page 288: ...288 Laser warning labels are attached to the projector Inside ...
