Epson Pro L1060U User Manual Download

Page: 277 / 315

277

Solutions When Only a Partial Image Appears
Solutions When the Image is Not Rectangular
Solutions When the Image Contains Noise or Static
Solutions When the Image is Fuzzy or Blurry
Solutions When the Image Brightness or Colors are Incorrect
Solutions When an Afterimage Remains On the Projected Image
Solutions to Sound Problems

Parent topic:

Solving Problems

Solutions When No Image Appears

If no image appears, try the following solutions:

• Make sure the lens cap is off.

• Press the

A/V Mute

button on the remote control to see if the image was temporarily turned off.

• Make sure all necessary cables are securely connected and the power is on for the projector and

connected video sources.

• Press the projector's power button to wake it from standby or sleep mode. Also see if your connected

computer is in sleep mode or displaying a blank screen saver.

• Press the

Menu

button. If the projector menu displays, there may be a problem with the connected

video source, cable connection, or port.

• Check the settings on the Signal menu to make sure they are correct for the current video source.

• Adjust the

Brightness Settings

• Check the

Display

setting to make sure

Messages

is set to

• If the projector does not respond when you press the control panel buttons, the buttons may be

locked. Unlock the buttons. Press and hold the

Enter

button for 5 to 10 seconds or use the remote

control.

• For images projected with Windows Media Center, reduce the screen size from full screen mode.

• For images projected from applications using Windows DirectX, turn off DirectX functions.

• If the other solutions do not solve the problem, reset all of the projector settings using the options on

the

Reset

menu.

Parent topic:

Solving Image or Sound Problems

Related concepts

Projector Connections

Summary of Contents for Pro L1060U




























































































































































































































































































































Search results

Summary of Contents for Pro L1060U

Reviews:

Related manuals for Pro L1060U

Brands by name

Popular brands

Epson Pro L1060U, User Manual

Search results

Summary of Contents for Pro L1060U

Reviews:

Related manuals for Pro L1060U

Brands by name

Popular brands