166
5.
A prompt appears asking if you want to use the displayed image as the user's logo. Select
Yes
and
press
Enter
.
6.
A prompt appears again asking if you want to use the displayed image as the user's logo. Select
Yes
and press
Enter
.
You see a completion message.
7.
Press
Esc
to return to the
Extended
menu.
8.
Select
Display
and press
Enter
.
9.
Select when you want to display the User's Logo screen:
• To display it whenever there is no input signal, select
Display Background
and set it to
Logo
.
• To display it whenever you turn the projector on, select
Startup Screen
and set it to
On
.
• To display it whenever you press the
A/V Mute
button, select
A/V Mute
and set it to
Logo
.
To prevent anyone from changing the User's Logo settings without first entering a password, set a
password and enable User's Logo security.
Parent topic:
Locking the Projector's Lens Settings and Buttons
You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You
can also lock the zoom, focus, and lens shift settings to prevent them from being adjusted.
Note:
You can use the remote control to control the projector when the control panel buttons are locked.
1.
Press the
Menu
button.
Summary of Contents for Pro L1060U
