PriorityFax 2000 Manual
Copying
(continued)
No image appears on the paper.
The paper roll may be inserted upside down. See Chapter
1.
Be sure that you inserted the document in the feeder face
down. Try copying again.
Print quality of the copy is poor.
You may be using the wrong type of paper. Use Epson
PriorityFax recording paper for best results.
After checking the type of paper you are using, change the
resolution setting as described in Chapter 4. For detailed drawings
or photos, use the fine or photo modes. Then make another copy.
After that, clean the inside of the fax machine as described in
Chapter 6 and make another copy.
If neither of these methods improves the image quality, take the
fax machine to an authorized Epson Customer Care Center.
To find the location of the nearest Customer Care Center, call
l-800-922-8911.
Telephone
One-touch and speed dialing don’t work.
Check to be sure the power cord is plugged in.
The one-touch and speed dialing numbers are not registered
properly. See Chapter 3.
Call reservation does not work.
The receiver may not have a call reservation feature. Check
with the receiving party.
The receiving party left the fax machine area.
The call reservation feature is set improperly. See Chapter 2.
5-6
