Epson Priority Fax 2000 Owner'S Manual Download Page 85

Page: 85 / 112

PriorityFax 2000 Manual

Dial the fax number and press

START.

Once your fax machine sends your document and receives the
polled document from the other party,

the

display returns to the

date/time. You do not receive a polling report; only

the

called-

side party receives a polling report.

Setting Delayed

Polling

To take advantage of two powerful fax machine features -
delayed send and polling-your machine offers Delayed Polling.
This feature enables your machine to request faxes from other

machines when you are away from the office and/or when
telephone rates are lower.

There are four delayed polling types: off, standard, sequential,
and turnaround; all of which are described in Using Polling earlier
in this chapter.

Note

Before using

any

type of polling, make sure that the other

party expects to be polled.

Setting delayed standard
polling

To request a document from a single destination at

time when

you are away from your fax machine, do the following:

Make sure no document is in the machine.

Press

FUNCTION.

You see

the

function display.

Press 3 to enter the delayed polling mode.

4-24

Summary of Contents for Priority Fax 2000

















































































































Search results

Summary of Contents for Priority Fax 2000

Reviews:

Related manuals for Priority Fax 2000

Brands by name

Popular brands

Epson Priority Fax 2000, Owner'S Manual

Search results

Summary of Contents for Priority Fax 2000

Reviews:

Related manuals for Priority Fax 2000

Brands by name

Popular brands