PriorityFax 2000 Manual
Activity Report
Timing
Ordinarily, the PriorityFax automatically prints an activity report
every 12 hours. (See page 2-25.) If you send and receive a great
number of faxes, you may want to change this interval. To
change
the time
between automatic activity reports, follow these steps:
Using Delayed Send
Make sure no document is in
the
machine.
Press
FUNCTION.
You see the function display.
Press 8. You see the following display:
Use the keypad to enter the
new
time. Remember that
the
time in
this function is the time between report printings,
not
the time of
day the reports are printed. If you choose
an
interval time of less
than ten,
enter two digits (for example, 03 for a three-hour
interval). The minimum interval is 01 (for a one-hour interval) and
the maximum is 24 (for a 24-hour interval).
Press
SET
twice to return to the date/time display.
The Delayed Send feature allows
you
to send
documents at
times
when you know you will be out of the office and when telephone
rates are lower. To use Delayed Send, follow these steps:
Insert a document face down into the feeder. The ready display
appears.
4-14
