Epson Priority Fax 2000 Owner'S Manual Download Page 74

Page: 74 / 112

Using the PriorityFax Advanced Features

Printing Lists

To see what settings you have made, what numbers you have
registered, or

what

faxes you have sent and received, you can use

the Print

function of the PriorityFax to print lists. This feature has

the

following options:

Function

Settings Printed

ACTIVITY

Faxes sent and received

FAX #

One-touch fax numbers registered

TEL #

One-touch telephone numbers registered

SPEED #

Speed dial numbers registered

USER SW

User switch settings

ALL LISTS

The FAX, TEL, and SPEED number lists

To print one of these lists, perform the following steps:

Make sure no document

is in the machine.

Press

FUNCTION.

You see the function display.

Press 2. You see the following display:

Use the

or # cursor key to select one of the options listed above.

When you see the option you want, press

START.

The fax machine

begins printing the list or lists.

After printing is over, the LCD returns to the function display.
Press

SET

to return to

the

date/time display.

4-13

Summary of Contents for Priority Fax 2000

















































































































Search results

Summary of Contents for Priority Fax 2000

Reviews:

Related manuals for Priority Fax 2000

Brands by name

Popular brands

Epson Priority Fax 2000, Owner'S Manual

Search results

Summary of Contents for Priority Fax 2000

Reviews:

Related manuals for Priority Fax 2000

Brands by name

Popular brands