Using the PriorityFax as a Tel&phone
Move the switch left to
H
for higher volume and right to
N
for
lower (normal) volume.
To adjust the ringer switch:
Locate the
RINGER
switch on the left side of the telephone cradle
to the
right
of the
HANDSET
switch.
Move
the
switch left to
H
for high, center to
L
for low, or right to
OFF
for no ringing.
Standard Dialing
There are two ways to start dialing
a
telephone call: lifting the
handset or pressing the
SPKR
button.
To use the handset, simply lift the handset off the cradle, wait for a
dial tone, and dial the number.
To use the
SPKR
button, follow these steps:
Press
SPKR.
Leaving the handset in its cradle, wait for
the
dial tone, and then
dial the number. (Include the area code if
the
number is outside of
your dialing area.)
Note
Remember that you can adjust the speaker volume by
moving
the SPEAKER
dial on the back control panel of
the fax machine.
When you hear
the
number start ringing, lift the handset. The
PriorityFax is not a speaker phone. You cannot speak to someone
on the other end without using the handset.
3-5
