152
Maintenance
Replacing the ink cartridges
This section describes how to replace the ink cartridges, using light magenta as an example. The replacement
positions differ for the other colors, but the procedure is the same.
See “Ink cartridge” on page 191 in this guide for the ink cartridge model numbers.
1
Open the ink cartridge cover, and wait at least 4 seconds until internal operations stop.
•
Use of Epson brand ink cartridges is recommended. Use of non-Epson brand ink cartridges
can result in problems that will not be covered by the warranty.
•
Epson cannot guarantee the quality and reliability of non-Epson brand products. Repairs
for any damage or breakdown of this product due to the use of non-Epson brand products
will not be free of charge even if the warranty period is still valid.
•
This product performs color adjustment based on use of Epson brand ink cartridges. Use of
non-Epson brand ink products can adversely affect the printing quality and prevent the
product from realizing its maximum performance.
•
Do not place the ink cartridge with the ink supply holes facing downward. This could cause
stains on a desk or other surface. In addition, dirt stuck on this product may prevent it from
functioning properly.
•
Do not store ink cartridges in environments exposed to high temperatures, freezing or
direct sunlight.
If you take out the ink in less than 4 seconds, there is a risk that the ink may spurt out.
Wait at least 4
seconds.
