Epson PP-100N - Discproducer - DVD Duplicator x2 User Manual Download Page 157

Page: 157 / 174

157

Troubleshooting

Problems and their remedies

Power/control panel problems

Symptom/Problem Status

Check/Remedy Procedure

The power does not turn on.

Hold down the power button for a moment.

Is the power plug disconnected from the outlet?

Check if the plug is inserted only half-way or inserted at a slant.

Are you using a power strip or similar device?

Insert the power plug directly into the wall outlet.

Is power being supplied from the outlet?

Insert the power cable plug for another electronic product to check if

power is being supplied.

The power does not turn off.

Is a job being processed?

The power cannot be turned off while a job is being processed.

The power turns off automatically when the processing of all jobs

finishes.

If you hold down the power button for a moment (at least 3 seconds),

the power off process begins immediately. The jobs are cancelled.

Did you just turn on the power?

The power cannot be turned off for about 15 minutes once the power

is turned on.

The power turns off automatically 15 minutes after “Power off Please

wait” appears on the LCD.

If you hold down the power button for a moment (at least 3 seconds),

the power off process begins immediately.

Are the power LED and ERROR LED flashing?

If the power LED and ERROR LED are flashing, hold down the power

button for a moment (at least 3 seconds).

If the power still does not turn off, unplug the power cable from the

outlet. Then, turn on the power again, and be sure to use the power

button to turn off the power. Leaving the power on can cause drying

and clogging of the print head.

A rattling sound is made when

the power is turned on.

Is there a foreign object (such as blue protective tape for transporting)

inside the product?

Press the power button to turn off the power, and then open the disc

cover and check that there are no foreign objects inside.

“EPSON PP- 100N” remains

displayed and the product

does not work when the power

is turned on.

Repair is required.

Please contact Epson Information Center.

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2















































































































































































Search results

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2

Reviews:

Related manuals for PP-100N - Discproducer - DVD Duplicator x2

Brands by name

Popular brands

Epson PP-100N - Discproducer - DVD Duplicator x2, User Manual

Search results

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2

Reviews:

Related manuals for PP-100N - Discproducer - DVD Duplicator x2

Brands by name

Popular brands