Using Your Software
23
Uninstalling Software
You can uninstall the software by following the steps below.
Note:
❏
In Windows 7, Windows Vista, or Windows Server 2008, you may be asked for an administrator
password or confirmation when uninstalling the software. When asked for a password, enter the
password to proceed with the operation.
❏
In Windows XP or Windows Server 2003, log onto Windows as a user with administrator
privileges (belonging to the administrator group) to uninstall the software.
❏
When installing the software, various Microsoft components may be installed. Some of them
may not be uninstalled when uninstalling the software.
1. Close all applications.
2. Click
Start
(
in Windows 7 or Windows Vista), and then select
Control Panel
.
3. Click
Uninstall a program
(Windows 7, Windows Vista, or Windows Server 2008) or
double-click the
Add or Remove Programs
icon (Windows XP or Windows Server
2003).
4. Choose EPSON Total Disc Maker.
5. Click
Uninstall/Change
(Windows 7, Windows Vista, or Windows Server 2008) or click
Change/Remove
(Windows XP or Windows Server 2003).
Note:
If you cannot perform the uninstallation due to any problem, uninstall the software by
double-clicking setup.exe in Discproducer Utility & Documents Disc.
6. Select
Remove
and click
Next
.
7. When the confirmation message appears, click
Yes
.
8. Follow the on-screen instructions.
Summary of Contents for PP-100II
Page 1: ...User s Guide M000555 00 ...
Page 36: ...Publishing Discs 36 2 Select type of discs to be published from the list then click Apply ...
Page 50: ...Publishing Discs 50 2 Select type of discs to be published from the list then click Apply ...
Page 77: ...Publishing Discs 77 2 Select Read Back from the list then click Apply ...
