Using Your Software
17
Setting a Working Folder and Log
After the software installation, create a
Working Folder
on the hard disk for the disc
publishing operation. You can also set for log files. Log files are useful for service and
support of the product.
Note:
These settings are reflected for all the CD/DVD/BD publishers registered (except for the PP-100N).
1. Select
Start
(
in Windows 7 or Windows Vista) -
All Programs
(or
Programs
) -
EPSON Total Disc Maker
-
EPSON Total Disc Setup
.
The EPSON Total Disc Setup will start.
2. Select
Common Setting for Publishing
from the
Tool
menu.
The
Common Setting for Publishing
screen will appear.
3. Click
Browse
to select a folder to create a
Working Folder
.
Note:
Select a drive with sufficient free space. For information on the necessary HDD space, see the
following section.
&
See “System Requirements” on page 15.
4. Check the checkbox for
Save publication log
if you want to save the usage history of
the product.
Note:
When the log files saved in the computer exceed 200MB, the older ones will be deleted (starting
with the oldest one) to make room for new ones.
5. Click
OK
.
Summary of Contents for PP-100II
Page 1: ...User s Guide M000555 00 ...
Page 36: ...Publishing Discs 36 2 Select type of discs to be published from the list then click Apply ...
Page 50: ...Publishing Discs 50 2 Select type of discs to be published from the list then click Apply ...
Page 77: ...Publishing Discs 77 2 Select Read Back from the list then click Apply ...
