Epson Powerspan, User Manual, Page: 56 / 219

System board options (continued)
Option
Hard Drive 1
and
Hard Drive 2
Settings Description
Drive Type nn Set to the hard disk drive type
Hard Drive n Disabled* of the specified IDE hard disk
drive or set to user-definable
drive types (2, 3, 48, or 49) and
enter parameters according
to the drive’sdocumentation;
see “Hard Disk Drive Types’ on
page 3-25 (1)
Parallel Port Base Address 378h - Select one of the Compatible
Compatible* optionsto set the port for
Base Address 378h - IBM AT compatible signals
Bidirectional select one of the Bidirectional
Base Address 278h - optionsto set the port for
Compatible IBM PS/2 compatible
Base Address 278h - bidirectional signals; address
Bidirectional 378h is for LPT1 and 278h is for
Disabled LPT2; select Disabled to
prevent the port from reacting
to any signals (no resources
are allocated when Disabled)
Serial Port 1 Base address 03F8h* Select the addressyou want
Base address 02F8h to use for serial port 1; address
Base address 03E8h 03F8h is for COM1, 02F8h is for
Disabled COM2, and 03E8h is for
COM3; set to Disabled to
prevent the port from reacting
to any signals (no resources
are allocated when Disabled)
(2)
Serial Port 2 Base address 02F8h* Select the addressyou want
Base address 03E8h to use for serial port 2; address
Base address 02E8h 02F8h is for COM2, 03E8h is for
Disabled COM3, and 02E8h is for
COM4; set to Disabled to
prevent the port from reacting
to any signals (no resources
are allocated when Disabled)
(2)
3-14 Running the EISA Configuration Utility