Epson Powerspan, User Manual, Page: 20 / 219

If you plan to install any ISA cards that came with their own
CFG files, you should install the cards after you have connected
the necessary peripheral devices and run the computer’s EISA
Configuration utility. This allows you to add the CFG file
information to your configuration so the program can give you
the card’s correct jumper and switch settings. Then you can set
the switches and jumpers and install the card. See the
documentation that came with your card(s) for information.
Be sure that the option card(s) you install do not exceed your
computer’s power supply limits, as described in Appendix B.
Then follow the instructions in Chapter 6 to install the cards.
Connecting Peripheral Devices
Refer to the illustration below to locate the ports on the back of
your computer.
keyboard port
serial port 2
VGA port
voltage
selector switch
AC inlet
mouse port
serial port 1
parallel port
1-6 Setting Up Your System