Epson Powerspan, User Manual, Page: 24 / 219

Configuring Your System
There are two programs you can use to configure your
computer: the SETUP program and the EISA Configuration
utility. Which one you use depends on the option cards you
may have installed in your computer.
You use the SETUP program to configure your computer only
in the following situations:
You did not install any option cards or installed only ISA
option cards that did not come with configuration (CFG)
files
You are not going to use the built-in SCSI subsystem
You do not have a diskette drive or have disabled your
diskette drive.
In all other cases, run the EISA Configuration utility to
configure your system.
Your computer’s SETUP program is stored in the system BIOS
ROM. You can run SETUP whenever you turn on or reset the
computer, regardless of whether you have installed an
operating system. See Chapter 2 for instructions on running the
p r o g r a m .
The EISA Configuration utility is on the System Configuration
diskette. See Chapter 3 for instructions on running this utility.
1-10 Setting Up Your System