manualshive.com logo in svg

Epson PowerRIP Stylus, User Manual, Page: 41 / 80

Share
Download
Epson PowerRIP Stylus User Manual Download Page 41

Lights

Operate

On when the printer is on. Flashes when the printer
is turning on or off.

Data

On when data is being received by the printer or
when data remains in printer memory.

Paper Out

On when the printer runs out of paper. Rapid
flashing indicates a paper jam. 

No Ink Cartridge

On when one or both ink cartridges are not installed.
The printer will not work unless both cartridges are
installed.

Font

Does not apply to Macintosh computers.

Economy

On when the economy printing mode is selected. In
economy mode the printer uses less ink by printing
fewer dots per character. Use this mode for rough
drafts of text only.

Condensed

Does not apply to Macintosh computers.

Pause

On when printing is paused. This light flashes when
you clean the print heads or replace ink cartridges.
Never turn off the printer when the 

Pause

 light is

flashing.

The 

Pause

 light also flashes when an error occurs.

2-10      

Controlling the Printer

Summary of Contents for PowerRIP Stylus

















































































Reviews:

No comments