Solving Problems
49
4. Highlight a solution (if this choice is available). Then press the
Select
button.
Press the
Esc
button if you need to back up.
If the solution is to adjust one of the settings, use the , ,
,
or
button on the projector or the
Select
button on the remote
control to adjust it.
5. To exit, press the
? Help
button again.
If none of the suggestions solves your problem, see additional
solutions to problems in the following sections.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status and
let you know when a problem occurs.
If the projector is not working correctly, first turn it off, let it cool,
and unplug it. Then plug the power cord back in and turn on the
projector. If this does not solve the problem, check the status lights on
top of the projector and try the solutions recommended on the
following pages.
The
power light is flashing red and you cannot turn on
the projector.
The lamp is cooling down. Wait until the light stops flashing red (it
will start flashing orange); then press the
Power
button to turn on the
projector.
Power light
Lamp light
Temperature light
