Fine-tuning the Projector
35
3. Use the
,
, , or buttons on the control panel or the
Select
button on the remote control to set the following options:
■
Keystone
Corrects keystone distortion of the image. This procedure
makes the image smaller. If the image looks uneven after you
adjust the shape, decrease the Sharpness setting (see page 30).
■
No-Signal Msg.
Selects a screen color (blue or black) to display when the
projector is not receiving a signal. (The logo setting displays
the EPSON logo.)
■
Startup Screen
Turn on this option to display the EPSON logo whenever the
projector starts.
■
Blank
Selects the screen color to display (blue or black) when you
press the
Blank
button. (The logo setting displays the
EPSON logo.)
■
Sleep mode
When sleep mode is on, the projector turns off the lamp if it
has not received any input signals for the specified amount of
time (1, 5, or 10 minutes). The default setting is
OFF
.
■
Projection
Selects the projection method, as follows:
■
Language
Select from 9 languages to be used for the projector menus.
4. When you’re finished, press
Esc
or
Menu
.
Setting
Projector position
Front
Projector is in front of the screen
Front/Ceiling
Projector is in front of the screen,
mounted upside-down from the ceiling
Rear
Projector is behind the screen
Rear/Ceiling
Projector is behind the screen, mounted
upside-down from the ceiling
