Epson PowerLite S10+, User Manual

Page: 75 / 129

Fine-Tuning the Projector
75
Customizing Power and Operation
You can use the Extended menu to customize the way the projector
displays images, enable Direct Power On, turn sleep mode on or off,
and customize other projector operations.
■
Display
Messages:
Lets you turn screen messages on or off.
Display Background:
Sets the screen background to
Black
,
Blue
, or
Logo
when no image signal is available.
Startup Screen:
Enables or disables display of the startup (User’s
Logo) screen when the projector is turned on.
A/V Mute:
Sets the screen background to
Black
,
Blue
, or
Logo
when the
A/V Mute
button is pressed.
■
User’s Logo
Create a custom startup screen, as described on page 80.
■
Projection
Select
Front
(to project onto the front of a screen),
Front/Ceiling
(when the projector is mounted upside-down from the ceiling),
Rear
(to project from behind onto a transparent screen), or
Rear/Ceiling
(to project from behind onto a transparent screen
when the projector is mounted upside-down from the ceiling).
■
Operation
note
If you hold down the
A/V Mute
button on the
remote control for about five
seconds, you switch between
Front
and
Front/Ceiling
or
Rear
and
Rear/Ceiling
.
If
Direct Power On
is
enabled, the power cord is
connected, and a power
outage occurs, the projector
will start when the power is
restored.