Solutions to Projector Power or Shut-Off Problems
If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:
• Make sure the power cord is securely connected to the projector and to a working electrical outlet.
• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to
turn on the projector.
• The power cord may be defective. Disconnect the cord and contact Epson.
• If the projector's lamps shut off unexpectedly, it may have entered standby mode after a period of
inactivity. Press the power button to wake the projector.
• If the projector's lamps shut off, the Status light is flashing blue, and the Temp light is orange, the
projector has overheated and shut off. Check the solutions for this light status.
• Make sure the lamps and lamp cover are installed securely.
• If the power button on the remote control does not turn on the projector, check its batteries and make
sure the
Remote Receiver
setting is turned on in the projector's menu, if available.
• Check to see if the projector is being controlled remotely through an RS-232 or LAN connection or a
scheduled setting.
• Make sure the
ID
switch on the remote control is set to
Off
.
Parent topic:
Solving Projector or Remote Control Operation Problems
Related references
Projector Feature Settings - Settings Menu
Projector Light Status
Related tasks
Unlocking the Projector's Buttons
Solutions to Problems with the Remote Control
If the projector does not respond to remote control commands, try the following solutions:
• Check that the remote control batteries are installed correctly and have power. If necessary, replace
the batteries.
• Make sure you are operating the remote control within the reception angle and range of the projector.
• Make sure the projector is not warming up or shutting down.
220
Summary of Contents for PowerLite Pro Z10000UNL
Page 2: ......
Page 10: ......
Page 25: ...Projector Parts Remote Control 25 ...
