Epson PowerLite Pro G5900, User Manual

Page: 57 / 140

Using the Projector on a Network
57
4. If you want to create a password for remote access to the
projector, highlight
Web Control Password
, press
Enter
, and
enter a password of up to 8 alphanumeric characters. When you’re
done, highlight
Finish
and press
Enter
.
5. Press
Menu
to exit.
Using Projector E-mail Alerts
When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
1. Press the
Menu
button, select the
Network
menu, then press
Enter
.
2. Choose
Mail
, then press
Enter
. You see the following screen:
3. Highlight
On
to receive e-mail notifications, then press
Enter
.
4. Enter the IP address for the
SMTP server
for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used: 127.x.x.x,
224.0.0.0 to 255.255.255.255 (where x is a number from 0 to
255).
5. Enter the SMTP server’s port number. The default value is 25.
You can enter a numeric value from 1 to 65535.
note
You can also set e-mail alerts
from EasyMP Monitor (see
the
EasyMP Monitor
Operation Guide for more
information).