Epson PowerLite Pro G5200WNL, User Manual

Page: 116 / 177

116
Managing Projectors
5. Do one of the following:
■
If your network assigns addresses automatically, turn on the
DHCP
setting.
■
If your network does not assign addresses automatically, turn
off
DHCP
and enter the projector’s
IP Address
,
Subnet
Mask
, and
Gateway Address
.
To enter numbers, use the pointer button on the remote
control to highlight the number you want to input, then press
Enter
.
6. When you’re done making all necessary changes, select
Return
,
Setup complete
, and then
Yes
to confirm that you want to save
the changes. Press
Menu
to exit.
Using Projector E-mail Alerts
When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
PowerLite Pro G5150NL and G5350NL
1. Press the
Menu
button on the remote control, select the
Network
menu, then press
Enter
.
2. Choose
Network Configuration
and press
Enter
.
note
If you’re a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you’re monitoring.
note
You can also set e-mail alerts
from EMP Monitor (see the
EMP Monitor Operation
Guide
for more
information).