Epson PowerLite Pro Cinema 7100 Page 22 User Manual Download

Page: 22 / 78

Setting Up the Projector

Installing Batteries in the Remote Control

The remote control uses two AA batteries.

Warning:

Keep batteries away from children. If a battery is swallowed, contact your doctor

immediately.

1. Release the tab and lift open the cover.

2. Insert two new AA batteries as shown.

3. Insert the tab on the cover and press it down until it

clicks into place.

Aim the remote control at the screen, or at the front or
back of the projector. Make sure you are within 30 feet
of the projector.

If you suspect the batteries are weak, press the

illumination button. If the buttons do not

glow, replace the batteries.

Turning the Projector On and Off

Turning On the Projector

1. Remove the lens cap.

2. Turn on any connected equipment you plan to use.

3. Turn on the main power switch on the back of the projector.

Summary of Contents for PowerLite Pro Cinema 7100















































































Search results

Summary of Contents for PowerLite Pro Cinema 7100

Reviews:

Related manuals for PowerLite Pro Cinema 7100

Brands by name

Popular brands

Epson PowerLite Pro Cinema 7100, User Manual

Search results

Summary of Contents for PowerLite Pro Cinema 7100

Reviews:

Related manuals for PowerLite Pro Cinema 7100

Brands by name

Popular brands