Problem Solving
61
Problem Solving
This section explains how to interpret the projector’s status lights, solve problems, and
contact technical support.
What To Do When the Lights Flash
The lights on top of the projector indicate its status and let you know when a problem occurs.
If all lights are off, make sure the power cable is connected correctly.
The
light is orange.
The projector is in sleep mode. Press the
button on the projector or the
button on the
remote control to turn it on.
The
light is flashing green.
The projector is warming up. Wait for the picture to appear. This can take a few minutes.
The
light is flashing orange.
The projector is cooling down. Wait until the light stops flashing before you unplug the
projector.
The
light is green.
The projector is operating correctly. If you don’t see a picture, open the lens cover slide.