Unpacking and Setting Up
19
5. Open the lens cover, then connect the power cord and plug in the projector. The
light turns orange.
Once you’ve finished setting up the projector, do one of the following:
■
If you would like to play a DVD, see “Playing DVDs” on page 20.
■
If you would like to connect other equipment to the projector, see“Using PowerLite
Presenter with Other Equipment” on page 29.
Turning the Projector Off
1. If there is a disc inside the projector, eject it.
2. Press the
button on the projector or the
on the remote control. The projector
will beep twice when it is finished powering off.
Warning:
Do not disconnect the power cable before the projector beeps, or you may damage
the projector.
3. Close the lens cover.