Epson PowerLite Home Cinema 700, User Manual

Page: 57 / 110

Fine-Tuning the Projector
57
Restoring the Default Settings
You can use the
Reset
option on any menu to restore the
factory-default settings for the settings in that menu.
To restore all the projector settings to their factory-default values,
select the
Reset
menu, highlight
Reset All
, press
Enter
, and select
Yes
to confirm.
Adjusting the Image
You can use the Image menu to adjust the brightness, sharpness, color,
tint, contrast, and
Auto Iris
settings.
1. Press the
Menu
button on the projector or remote control and
select the
Image
menu. You see a screen similar to one of these:
note
When you select
Reset All
in the Reset menu, it does
not reset the Input Signal,
User’s Logo, Language, or
Lamp Hours settings.
note
If you are using the HDMI
port, you see the menu on
the left if the current signal
is digital RGB video, or the
menu on the right if the
signal is component video.
Computer/RGB video Component video/
Composite video/
S-Video