Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User’s Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide for details and additional connection types.
Video device
Connect multiple video devices and use the Source buttons on the remote
control or the
Home
and arrow buttons on the projector to switch between
them.
HDMI cable
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the
HDMI 2/MHL
port.
MHL cable
Streaming device
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device’s documentation for
more information.
Connect audio
External speakers
Connect your device’s audio output to your home theater receiver or powered
speakers.
Note:
When outputting sound through an external source, you may need to
reduce the projector volume to zero or make sure that the correct audio output
is selected on your device to prevent duplicate sound from being heard from
the projector.
Home theater system
Video source
Surround sound
Receiver
Projector
Video cable
Powered speakers
External speakers
Video source
Projector
Video cable
Note:
See your home theater receiver documentation for more information
on connections.
Audio Out port
You can connect the projector to external self-powered speakers through the
Audio Out
port.
3.5 mm stereo mini cable
Built-in speaker
The projector has a built-in speaker that can play audio from a connected video
source (DVD player, streaming device, etc.) using an HDMI connection.
HDMI cable
Streaming device
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector.
3
Remove the lens cap.
4
Press the
power button on the projector or the
On
button on the
remote control. The power light flashes blue, then stays on.
Note:
To shut down the projector, press the
power button on the
projector twice or the
Standby
button on the remote control once.
You don’t have to wait for the projector to cool down.
5
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen that appear, then press
Enter
to select it.
You can switch between projection sources and quickly access various
adjustment options from this screen.
6
The default language of the menu system is English. To select another
language, press the
Menu
button on the projector or remote control.
Select
Extended
and press
Enter
. Select
Language
and press
Enter
.
Select your language and press
Enter
. Press the
Menu
button to exit the
menu system.
Adjust the image
1
If you don’t see an image, press one of the Source buttons on the remote
control or the
Home
and arrow buttons on the projector to select the
image source.
Note:
If you still see a blank screen or have other display problems,
see “Troubleshooting.”
2
For the best image quality, place the projector directly in front of the
center of the screen, facing the screen squarely. If this is not possible, turn
the horizontal and vertical lens shift dials to adjust the image position and
center it on the screen.
3
If the image is tilted, adjust the front feet as shown below.
4
Turn the zoom ring to reduce or enlarge the image.
5
Turn the focus ring to sharpen the image.
6
If your image is uneven on the sides, you can use the keystone correction
feature to adjust the image. To use this feature, you must first set the lens
to the center-top position using the lens shift dials.
Press the
or
button to display the keystone correction screen. Then
press the
or
button to correct for horizontal keystone distortion
and the
or
button to correct for vertical keystone distortion.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Turn projector on
Choose which source
to display
Access projector
menus
Turn projector off
Navigate projector
menus
Display Home screen
For more information on using the remote control, see the online
User’s Guide.
Viewing 3D images
To view 3D content, you must first connect a 3D-compatible video device to
one of the HDMI ports on your projector. You will also need a pair of Epson
®
(part number V12H548006) or Epson-compatible RF 3D active shutter glasses.
1
Turn on and begin playback on the 3D-compatible video device.
Note:
Make sure you set the video device to play content in 3D mode.
2
Press the
3D Format
button on the remote control, if necessary.
3
Slide the power switch on your 3D glasses to the
On
position.
Note:
If the glasses don’t automatically display 3D content, you may
need to pair them with the projector. Move the glasses within 10 feet
(3 m) of the projector, then press and hold the
Pairing
button on the
3D glasses for at least 3 seconds. The status light on the glasses will
alternately flash green and red, then remain green for 10 seconds if
pairing is successful.
PowerLite
®
Home Cinema 3710
