Epson PowerLite Home Cinema 3100 User Manual Download Page 29

Page: 29 / 329

Screen or image size Offset from lens

center (2)

Offset from lens
center (3)

Offset from lens center (4)

40 inches (101.6 cm)

2.4 inches (6 cm)

26.4 inches (67 cm)

10.2 inches (26 cm)

60 inches (152.4 cm)

3.6 inches (9 cm)

39.6 inches (101 cm)

15.4 inches (39 cm)

80 inches (203.2 cm)

4.8 inches (12 cm)

52.8 inches (134 cm)

20.5 inches (52 cm)

100 inches (254 cm)

6 inches (15 cm)

66 inches (168 cm)

25.6 inches (65 cm)

120 inches (304.8 cm) 7.2 inches (18 cm)

79.2 inches (201 cm)

30.7 inches (78 cm)

150 inches (381 cm)

9 inches (23 cm)

99 inches (251 cm)

38.4 inches (98 cm)

200 inches (508 cm)

12 inches (30 cm)

132 inches (335 cm)

51.2 inches (130 cm)

Parent topic:

Projector Placement

Projector Connections

See these sections to connect the projector to a variety of projection sources.

Caution:

If you will use the projector at altitudes above 4921 feet (1500 m), turn on

High Altitude Mode

to ensure the projector's internal temperature is regulated properly.

Connecting to an HDMI Video Source
Connecting to Computer Sources
Connecting to a Computer for HDMI Video and Audio

Parent topic:

Setting Up the Projector

Related references

Projector Setup Settings - Extended Menu

Connecting to an HDMI Video Source

If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.
The HDMI connection provides the best image quality.

Connect the HDMI cable to your video source's HDMI output port.

Summary of Contents for PowerLite Home Cinema 3100










































































































































































































































































































































Search results

Summary of Contents for PowerLite Home Cinema 3100

Reviews:

Epson PowerLite Home Cinema 3100, User Manual, Page: 29 / 329

Search results

Summary of Contents for PowerLite Home Cinema 3100

Reviews: