39
USB port instead of connecting the camera to the projector. See the document camera manual for
details.
Parent topic:
Related references
Optional Equipment and Replacement Parts (U.S. and Canada)
Optional Equipment and Replacement Parts (Latin America)
Connecting to an HDBaseT Transmitter
To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional
HDBaseT transmitter using a 100Base-TX network cable. This is useful when you want to send a signal
to or control the projector from a remote location, such as in a hall or event site, since you can use a
network cable up to 328 feet (100 m) in length. To ensure proper data transmission, use a Category 5e
STP cable or better.
1.
Turn off the projector and HDBaseT transmitter.
Note:
Make sure the projector and HDBaseT transmitter are turned off when connecting or
disconnecting a network cable between the two devices.
2.
Connect one end of the network cable to the
HDBaseT
port on the transmitter.
3.
Connect the other end to the projector's
HDBaseT
port.
Note:
See the documentation that came with the HDBaseT transmitter for instructions on connecting
it to your video device or computer.
Summary of Contents for PowerLite EB-L520W
Page 1: ...PowerLite EB L520W User s Guide ...
Page 2: ......
Page 10: ......
Page 27: ...27 Front Rear Front ceiling ...
