Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector, User Manual

Page: 111 / 142

Solving Problems
111
Viewing the ‘About’ Menu Screen
Use the About menu to view information on the display settings of
your computer and the number of hours the lamp has been used.
To access the About menu:
1. Press the
Menu
button. You see the projector’s main menu
screen.
2. Highlight the
About
menu and press
Enter
.
You see the lamp usage hours and various input signal settings on
the right:
The lamp typically lasts up to 7000 hours. If the number shown is
close to that, make sure you have a spare lamp handy. (The lamp
usage timer shows 0H until you’ve used the lamp for at least 10
hours.)
If you’ve installed a new lamp, be sure to reset the lamp timer (see
page 105).
note
The information displayed
depends on the input signal
currently selected.
Video
Audio
Setting
User’s Logo User’s Logo
Advanced1
About
Reset All
Frequency
Source
V ---.---Hz V ---.---Hz
Reset Lamp Timer
H ---.---kHz H ---.---kHz
Lamp 0H
SYNC Mode
SYNC Polarity
------
V ------ V ------
H ------ H ------
Resolution
Refresh Rate Refresh Rate ---.-- Hz
----x ---- ----x ----
Computer1
Input Signal
:
:
:
:
:
:
:
:
: Analog-RGB
Execute
[ ]: Select [ ]: Enter [Menu]: Exit
Effect
Advanced2
:
Lamp usage