Epson PowerLite 84 User Manual Download Page 48

Page: 48 / 123

Connecting to Computers and Other Equipment

Connecting an RGB Video Source

1. Locate the VGA computer cable provided with the projector.

2. Connect the cable to the video port on your player and the

Computer1

Computer 2

port on the projector.

3. If you want to play sound through the projector, see page 49 for

instructions on connecting audio cables.

4. If you don’t need to make any other connections, see page 17 for

instructions on turning on the projector and adjusting the image.

Once the projector is turned on, press the

button on the

remote control or the

Source Search

button on the projector’s

control panel and select

Computer1

Computer2

as the image

source.

note

Make sure the Input Signal
setting in the Signal menu is
set to Auto or RGB Video
(see page 67).

Connect to RGB video source

Summary of Contents for PowerLite 84




























































































































Search results

Summary of Contents for PowerLite 84

Reviews:

Epson PowerLite 84, User Manual, Page: 48 / 123

Search results

Summary of Contents for PowerLite 84

Reviews: